πŸ“ Serving Naples, Bonita Springs, Marco Island & All SWFL | Licensed & Insured Β· Florida Contractor | πŸ“ž 239-544-1165
Service · Naples, Florida
Updated November 10, 2026

Post-Construction Window Cleaning Naples FL —
Paint, Stucco & Label Removal

New construction and remodels leave windows covered in paint overspray, stucco splatter, mortar and stickers that ordinary window washing will not remove. We do the final glass clean for builders, remodelers and homeowners, quoted online.

📞 Call for a Free Quote — 239-544-1165
Part of our Window Cleaning service →
Final
Clean Before
Closing
Tempered
Safe
Methods
COI
Sent to
Builders
15–30%
Less Than
Competition
“New glass gets scratched more often during cleanup than during construction”
Get Your Free Quote →
🏗️ What Construction Leaves on the Glass

Windows go in early on most Naples builds, before stucco, paint, drywall and landscaping are finished. By the time the house is ready for a walkthrough, the glass has stucco splatter along the bottom, paint mist from spraying the trim, drywall dust inside, caulk smears around the frames and manufacturer labels baked on by weeks of sun.

Each of those needs its own approach. Stucco and mortar are alkaline and can etch glass if left on too long. Paint overspray bonds to the surface. Label adhesive turns gummy in the heat. A general window wash does not touch most of it.

The biggest risk is scratching. Most large windows and all sliders on new homes are tempered or impact-rated glass. Tempered glass can carry tiny bits of fabrication debris on the surface, and dragging a razor blade across it can leave long, permanent scratches. Those scratches are often blamed on the window maker when the cleanup caused them.

We remove construction debris with tools and methods matched to the glass type, so the windows the buyer or owner sees at closing look the way the manufacturer shipped them.

Before and after window cleaning on a newly finished Naples home
Construction residue removed from new glass
For Builders and Remodelers

We are Florida licensed and insured and send a certificate of insurance before we start. We can work around other trades on the punch list and return for a touch-up after final landscaping if needed.

🧰 How We Remove Construction Debris Safely
Clean windows on a Naples home ready for listing or closing
Ready for walkthrough or closing

We start by finding out what glass is installed. Tempered panes usually carry a small etched mark in one corner, and the window paperwork or the builder can confirm what the rest are. That decides which tools go near each pane.

Everything gets soaked first. Water and a construction-cleanup solution soften stucco, mortar and dust so they lift instead of grinding across the glass. On annealed glass, a new blade held flat with plenty of lubrication can be used if the manufacturer allows it. On tempered glass we skip blades and use non-scratch pads, plastic scrapers and dwell time instead.

Labels and adhesive come off with an adhesive remover that is safe for glass and frames. Paint specks are softened and lifted. Caulk and sealant smears are trimmed carefully so the seal itself is not cut.

Last comes a full detail: glass, frames, sills and slider tracks vacuumed of sand and drywall dust, then a final squeegee inside and out.

DebrisRisk if LeftHow We Remove It
Stucco & mortar splatterAlkaline residue can etch glassSoak, soften, lift with non-scratch tools
Paint oversprayBonds to glass, hazes the viewSoften and lift; blade only on approved annealed glass
Labels & stickersAdhesive bakes on in the sunGlass-safe adhesive remover
Caulk & sealant smearsCutting the seal causes leaksCareful trimming at the surface only
Drywall dust & sand in tracksGrinds slider rollersVacuum, scrub and wipe tracks
🏠 Projects We Clean
New Homes

Custom & Spec Builds

Final glass clean before the owner walkthrough, closing or listing photos.

Remodels

Window & Door Replacement

Impact window and slider retrofits that leave stucco patching and labels on new glass.

Renovations

Paint & Stucco Projects

Exterior repaints and re-stucco jobs that put overspray on existing windows.

Commercial

Storefront Build-Outs

New tenant spaces that need clean glass before opening day.

💰 Post-Construction Pricing

Construction cleanup varies with the amount of debris, glass type, home size and timing, so we quote it online. Once a home is cleaned, our regular window rates apply for later visits.

New Home Final Window Clean
Paint, stucco, labels and tracks
Custom Quote
Remodel or Window Replacement Cleanup
Affected windows and doors only
Custom Quote
Storefront Build-Out
New commercial glass before opening
Custom Quote
Follow-Up Window Cleaning, Single-Story
Regular cleaning after move-in
Get a quote
Timing Matters

Book the final glass clean after stucco, paint and caulk are finished and before the landscape crew runs sprinklers for the first time. That keeps fresh mineral spray off clean glass.

✅ Our Post-Construction Process
1

Online Quote

Send a few photos with your online quote request. We note the windows, doors and debris, then quote the job.

2

Quote and Schedule

You get a firm price and a date that fits the punch list and other trades.

3

Soak and Soften

Glass is soaked so stucco, mortar and dust lift without grinding.

4

Remove Debris

Paint, labels, adhesive and splatter come off with tools matched to each glass type.

5

Detail Everything

Frames, sills and tracks are vacuumed and wiped, then glass is squeegeed inside and out.

6

Final Check

We walk the property with you or the site manager and touch up anything missed.

📍 Areas We Serve

We provide post-construction window cleaning in Naples FL and throughout Southwest Florida:

NaplesNorth NaplesBonita SpringsEsteroMarco IslandPelican BayPark ShorePort RoyalOlde NaplesGrey OaksTiburonMediterraFiddler’s CreekLely ResortVanderbilt BeachAve Maria
Who Protects the Glass While the House Is Built

The International Window Cleaning Association publishes a glass informational bulletin on construction site protection and maintenance of architectural glass. Its message is that clean glass at closing depends on open communication and full cooperation among the general contractor, the professional window cleaner and every trade on site. Once the glazing is in, the bulletin says the condition of the glazed materials should be inspected and documented on a daily basis, and it asks the builder to put systems and procedures for protection in place after the glazing subcontractor requests them in writing.

It also asks that all construction trades be made aware of the potential for permanent damage and of their own level of responsibility. For a homeowner running a remodel, that is a useful checklist: make sure the stucco crew, the painter and the roofer all know the new impact windows are in before they start.

Early Cleaning Beats Aggressive Cleaning

Among the causes of chemical attack and pitting, the IWCA bulletin lists overspray and runoff of chemicals used to seal or clean concrete, masonry and roofing. It states that professional cleaning at the first signs of build-up can lower the potential for glass damage, and that surface contact with harmful materials requires prompt cleaning by professional window cleaners. It is just as direct about the opposite approach: a more aggressive procedure may itself damage the glass, and careful thought and discussion must come before one is used.

That has a practical side for our own trade. On a new home where the driveway is being cleaned and sealed, or the roof is getting its first wash, we would rather schedule those jobs before the final glass clean, cover the low glass nearest the work, and rinse any drift off the panes the same day instead of letting it sit. On a long remodel, one interim rinse of the glass midway through can mean far less scraping at the end.

Scratches, Weld Spatter and the Scratch Waiver

The bulletin warns that deep surface scratches, contact with hot weld spatter and edge damage threaten the structural integrity of glass and may require glass replacement. The IWCA’s glass surface information adds that some tempered glass surfaces are highly susceptible to scratching, that damage can occur through no direct fault of the window cleaner, and that cleaners should still ask the builder to sign a glass scratch waiver even when scraping is reduced.

We would rather have that conversation before the first pane is touched. On builder jobs, the waiver, the list of panes with existing marks and the agreed method go into writing first. On a homeowner remodel, we walk the windows with you in good light, point out any existing scratches, chips or weld marks we can see, and note them before cleaning starts.

πŸ“ž Your Quote TODAY - Call or Text
Free Quote Β· Post-Construction

Get a firm price for Post-Construction, usually the same day.

Tell us what needs cleaning and where. We review your photos, send a written price by text or email, and handle gate and building access.

Free
Online quote
15–30%
Less than competition
Licensed
Florida & insured
Free Β· No Obligation

Get Your Free Quote

Tell me what needs cleaning and where β€” I'll send a firm, no-obligation price by text or email, usually the same day.

Get My Quote β†’
βœ“Licensed Florida contractor
βœ“Vendor in Top Naples gates
βœ“15–30% less than franchise
βœ“Soft wash only β€” With Warranty
You Can Also Decide When
Reserve Your Spot Β· No Obligation

Lock in the best day for your schedule

Reserve the best time and date for your schedule and I'll follow up with your numbers. No payment to hold a spot and no obligation to keep the booking β€” reserve now, decide once you have the price.

βœ“ No payment to reserve βœ“ Quote sent same day βœ“ Cancel anytime, no charge
November 2026
M
T
W
T
F
S
S
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Reserve My Spot β†’
Takes about a minute
βœ“Pick any open day that works
βœ“Held at no cost, no card
βœ“Quote sent same day
βœ“Confirm only if it works
❓ Frequently Asked Questions
How do you remove paint from new windows without scratching them?
We soak and soften paint first, then lift it with non-scratch pads and plastic scrapers. A razor blade is only used on annealed glass where the manufacturer allows it, held flat and well lubricated.
Why not just use a razor on all the glass?
Tempered glass can carry tiny fabrication particles. A blade drags them across the surface and leaves scratches that cannot be polished out. Most sliders and large windows on new Naples homes are tempered.
When should post-construction window cleaning be scheduled?
After stucco, paint and caulking are done and before final irrigation starts. Ideally a few days before the owner walkthrough or closing.
Do you work for builders and contractors?
Yes. We send a certificate of insurance before starting and can schedule around other trades and the punch list.
Is this different from regular window cleaning?
Yes. Regular cleaning removes dirt. Post-construction cleaning removes paint, stucco, mortar, adhesive and dust, which takes more time and different tools.
How much does post-construction window cleaning cost?
It is quoted online, based on debris, glass type and home size. Regular window cleaning after move-in is quoted the same way.
🔗 More on Window Cleaning
Main serviceWindow Cleaning in Naples FL
Pricing, process & service areas →
πŸ“š Page Contents

About the Author

Blane Perun
Owner Β· Naples Pressure Washing & Roof Cleaning Β· 26 years experience

Owner Blane Perun started this company with a simple premise: Naples homeowners deserve a professional exterior cleaning option that doesn’t come with the inflated pricing of franchise operations and large corporate companies.

Exterior Maintenance
Naples Pressure Washing & Roof Cleaning
Ready to Schedule Your Cleaning
"15-30% less than the competition β€” always."
239-544-1165
Naples Home Improvement Group brands: Streamline Soft Wash Roof Cleaning, Naples Pressure Washing, Mission: Spotless Naples FL Window Cleaning, Wash & Glow and 3-2-1 Blast Off Roof Cleaning

Our Other Companies