Hurricane Shutter Cleaning Naples FL —
Accordion, Roll-Down & Panels
Exterior storm shutters collect salt, pollen, mildew and grit in their tracks, and dirty tracks make shutters hard to close when a storm is coming. We wash shutters at low pressure with mild cleaners, and quote by type and count.
📞 Call for a Free Quote — 239-544-1165Part of our Post-Storm Cleanup service →
Slats & Panels
Shutters
Competition
in Florida
Hurricane shutters in Naples spend most of the year open and exposed. Salt air settles on them, pollen sticks to them in spring, and summer rain splashes dirt up from the beds below. Accordion shutters hold all of this inside their folds and tracks. Roll-down shutters hold it in the slats and side rails. Bahama and colonial shutters show mildew on the louvers within a season or two.
Dirty tracks are more than a looks problem. Grit and dried salt in a track or a roll-down rail make shutters stick, drag and jam. That is the last thing you want when a storm is two days out and everyone on the street is closing up at once. A wash before hurricane season lets you test every shutter while there is still time to call your shutter company.
Stored panels need attention too. Corrugated aluminum and steel panels and clear polycarbonate panels often sit in a garage or storage closet for years. They collect dust, mildew and wasp nests. After a storm they come down covered in debris and salt and go back into storage that way.
This page is about exterior storm shutters. If you have interior plantation shutters, those are a different job handled by indoor cleaning services.

Many associations set rules on shutter type, color and when shutters may be closed. Check your documents or ask your manager before scheduling work on shutters on common walls.

Accordion shutters are opened and closed in sections as we wash so we can reach the folds. We apply a mild detergent, brush the blades and rinse at low pressure, then flush the top and bottom tracks to clear grit and salt.
Roll-down shutters are washed in the down position so we can clean the full curtain of slats, then rolled up while we rinse the side rails. We keep water out of the motor housing and away from switches.
Bahama and colonial shutters get a soft wash mix to kill mildew on the louvers, gentle brushing and a low-pressure rinse. Painted wood and older aluminum versions are handled with care so finish does not lift.
Storage panels are laid flat and washed on both sides, then left to dry fully before restacking. Clear polycarbonate panels get mild soap and soft brushes only. Strong cleaners and high pressure can cloud and scratch them.
| Shutter Type | Where Dirt Builds Up | How We Clean It |
|---|---|---|
| Accordion | Folds, top and bottom tracks | Section by section, detergent, track flush |
| Roll-down | Slats, side rails | Wash down position, rinse rails, protect motor |
| Bahama | Louvers, hinge arms | Soft wash for mildew, low-pressure rinse |
| Colonial | Louvers, edges, hinges | Soft wash, brush, gentle rinse |
| Storm panels (metal or clear) | Both faces, stacking edges | Laid flat, mild soap, dry before storage |
Spring prep
Washing shutters before June lets you test every one and fix problems before a storm is on the map.
Salt and debris
Shutters that took wind-driven rain and spray need a freshwater wash before they go back open or into storage.
Curb appeal
Grimy accordion shutters stand out on the front of a home. Cleaning them matches the rest of a house wash.
Garage cleanout
Stacked panels that have sat for years get washed and dried so they are ready to hang.
Shutter cleaning is priced by type and count. Most owners add it to a house wash so walls and shutters are done in one visit.
We clean shutters. We do not repair, adjust, lubricate motors or replace parts. If a shutter sticks after cleaning, we tell you so your shutter company can look at it.
Count and check
We list each shutter type and note any that stick, bind or have damaged parts.
Protect the area
Plants below are wetted, and switches and motor housings on roll-downs are kept dry.
Wash the shutters
Mild detergent or soft wash mix, brushed and rinsed at low pressure.
Flush the tracks
Top and bottom tracks and side rails are flushed of grit, sand and salt.
Wash stored panels
Panels are cleaned flat on both sides and left to dry before stacking.
Report and record
You get a list of any shutters that still bind and a written service record.
We provide hurricane shutter cleaning in Naples FL and throughout Southwest Florida:
Eastern Metal Supply, a Lake Worth hurricane protection supplier that sells Bertha accordion and roll shutter systems, publishes a short maintenance note for owners, and it lines up closely with how we approach shutters. For accordion shutters it says to open the shutter and wash all blades and tracks with soapy water, then rinse clean. For roll shutters it says to lower the shutter into the down position and wash the curtain, tracks and box with soapy water, then rinse with clean water. For Bahama and colonial shutters it calls for washing the shutter, tracks and arms with soapy water and a clean-water rinse twice a year.
The same note is specific about what to leave out. It says harsh chemicals, detergents, or cleaners such as chlorine or bleach should be avoided, and it warns against high-pressure spray because extreme pressure could crack or destroy caulking or remove paint. Where a shutter maker’s guidance rules out bleach, we follow it: mildew on those louvers is worked off with soapy water and a soft brush, not a chlorine mix, and the rinse stays at garden-hose force near caulk lines and painted edges.
On frequency, EMS recommends cleaning roll shutters twice yearly, or more often in coastal or high-corrosion salt areas. Homes near the Gulf, on the bays, or on Marco Island fall into that coastal group. A spring wash before the season opens and a fall wash after the last storm of the year is a sensible rhythm for most of them.
Washing clears salt and grit out of a track, but lubrication is a different job. EMS says top tracks, rollers and locking systems on accordion shutters, and the moving parts of roll shutters, should be lubricated with a dry silicone spray, and that threaded areas on bolts, hinges and fasteners on Bahama and colonial shutters get the same. It specifically says to avoid oil-based lubricants such as WD-40, which contains water.
We don’t lubricate or adjust shutters, so the order matters. Let the tracks dry fully after our visit, then apply the dry silicone yourself or have your shutter company do it as part of their service; EMS itself recommends a service contract for professional routine maintenance. Then run every accordion section and every roll-down through a full open-and-close cycle while the weather is calm. A shutter that still drags on a clean, lubricated track points to a mechanical problem, and that is worth knowing in May rather than the afternoon before a storm.
For stored panels, the useful habit is to wash and fully dry them before they go back in the garage, then stack them with their mounting hardware bagged and labeled by window. Panels put away wet, still carrying salt from a storm, are the ones that come out next season spotted with mildew and corrosion around the bolt holes.
Get a firm price for Hurricane Shutter Cleaning, usually the same day.
Tell us what needs cleaning and where. We review your photos, send a written price by text or email, and handle gate and building access.
Get Your Free Quote
Tell me what needs cleaning and where β I'll send a firm, no-obligation price by text or email, usually the same day.
Get My Quote βLock in the best day for your schedule
Reserve the best time and date for your schedule and I'll follow up with your numbers. No payment to hold a spot and no obligation to keep the booking β reserve now, decide once you have the price.



